Libidex – Playsuit – Rogue (RRP £275)

Different angles shown here it in Olive Green with Black.

RRP £275

Used in this photoshoot.

Main Latex Thickness: 0.40mm

A loose cut playsuit for a comfortable fit.

The Rogue Playsuit has a patrol / combat style look and features a gathered waistband with a drawstring pull.

The pockets and yoke are decorated with trims to complete the look.

Accessories (Hat, etc.) not included.

Photos by Libidex.

For all latex and rubber items, before use, we recommend:

1. Wash the garment in the shower with lukewarm water to remove all traces of talc, polish, etc.; if needed, you can use a mild soap with a balanced PH level (the same one that you use for your body is fine) for stubborn areas.
2. Drip-Dry / Air-Dry by hanging the garment on a plastic or wooden clothes hanger (avoid metal ones, in fact try to avoid having the latex, especially light coloured one, coming in contact with metals as it can stain…also with perfumes by the way).
3. When dry, apply a silicone-based dressing aid such as Pjur Cult ( https://fab.london/shop/pjur-cult/ ) inside and out.
4. Use a cover bag, like the ones you get when you get your clothes back from the dry cleaners, and store in your wardrobe away from direct sunlight. Check periodically to see if the latex requires a top-up.
5. When you are ready to wear the garment, apply a silicone based dressing aid such as Pjur Cult ( https://fab.london/shop/pjur-cult/ ) on your body where the latex will make contact with it (it should already be lubed on the inside) THIS WILL MAKE SURE THAT YOU AVOID SNAGGING AND POTENTIALLY TEARING THE GARMENT; finally, apply it on the outside for a shiny result!
6. Pjur Cult (100 ml / 3.38 fl.oz) Silicone Based Lubricant for Latex and Rubber: https://fab.london/shop/pjur-cult/